INCUBATOR CO2

Specifications

Regulation by microprocessor and digital reading of temperature and CO2.
For adjustable temperatures from ambient +5°C to 50°C.
Stability: ±0.2 °C, at 37 °C. Homogeneity: ±0.5 °C, at 37 °C. Resolution: 0.1°c.
Alarm range: from ambient +5 °c to 50 °c. Resolution: 0.1°c.
CO2 range: from 0 to 20%. Stability: ±0.3%. Resolution: 0.1%.

Steel exterior body enamelled in epoxy oven and with thermal insulation around the useful chamber.
Internal stainless steel chamber with support for shelves, easily removable, to facilitate cleaning inside the chamber.
Double door. One interior, made of tempered glass with a silicone gasket, and another exterior, made of steel with a magnetic closure, duly heated to avoid condensation on the glass door.
Soft closing of the doors, avoiding any vibration inside the chamber.
The CO2 intake is made from the rear, through a metal terminal for a Ø 6 x 4 mm tube.
RS-232 output for reading and printing of parameters by computer.

Digital electronic control of temperature and CO2 by means of a single-lever button and LCD screen that facilitates the start-up and operation of the chamber.
The degree of humidity inside the chamber is constant, of the order of 98% R.H. and produced directly by evaporation of the water that we have previously introduced at the bottom of the chamber.

Capacity: 150L
Internal measurements: 65x50x45cm (Height x Width x Depth)
External measurements: 95x65x73cm (Height x Width x Depth)
Accommodations for tray guides: 9
Consumption: 1100W (* 2025 W in sterilization mode)
Supplied with two JBG532 trays